Skip to content

You decide what follows you

This site sets trackers, described in detail under “Choose”. They only load with your consent, and your refusal is kept for as long as your consent would be.

Privacy policy
Black radiator shelf bracket, 3D render of the printed part
Black radiator shelf bracket, 3D render of the printed part
Two brackets on the radiator with the board slid into the slots
Two brackets on the radiator with the board slid into the slots
The six files, for boards from 15 to 30 mm thick
The six files, for boards from 15 to 30 mm thick
Bracket dimensions: 120 mm wide, 126 to 141 mm tall
Bracket dimensions: 120 mm wide, 126 to 141 mm tall
Table to choose the file by board thickness
Table to choose the file by board thickness
Side view: arm on the radiator, gusset in the gap behind it
Side view: arm on the radiator, gusset in the gap behind it
Recommended print settings
Recommended print settings
Close-up of the slot holding the board
Close-up of the slot holding the board
Two printed black brackets resting on a radiator
Two printed black brackets resting on a radiator

Image 1 of 9

STL files, radiator shelf bracket

Six files, one board thickness per file

Rating 4.7 out of 5See all 3 reviews

€4.90

Files to download, available right away

In short

  • Instant download after payment, nothing is shipped
  • Six STL files: boards of 15, 18, 20, 22, 25 and 30 mm
  • A print settings file comes with them

The problem

You own a 3D printer and a radiator that serves no purpose. Buying a finished part when the spool is already on the machine makes no sense.

The solution

You get the files, you print the pair yourself, the same day. Measure your board, take the matching file, print it twice.

Description

What is in the pack

Six STL files, one per board thickness: 15, 18, 20, 22, 25 and 30 mm. Measure your board, take the file that matches, print it twice. A shelf always needs two brackets.

The settings

A text file comes with the pack, listing the recommended material, layer height, infill, wall count and plate orientation. These are the settings I use for the parts I sell.

Material matters

A radiator gets hot. PLA softens and creeps under load. Print in ASA, PETG or ABS.

Delivery

The download link is available as soon as payment clears. Nothing is shipped.

Technical details

Format
STL
Number of files
6, plus a settings file
Thicknesses covered
15, 18, 20, 22, 25 and 30 mm
Recommended materials
ASA, PETG or ABS
Delivery
Instant download

Safety warning

You print the part yourself: its strength depends on your printer, your filament and your settings. Test it empty before trusting it with anything. Light loads only, three kilos maximum. PLA softens on a hot radiator, use ASA, PETG or ABS instead.

Manufacturer and traceability

Manufacturer
Nyllao3D
Product identifier
NYL-STL-EQS
Country of manufacture
France

Customer reviews

4.7Rating 4.7 out of 53 reviews

  • 5 stars2 reviews
  • 4 stars1 review
  • 3 starsNo reviews
  • 2 starsNo reviews
  • 1 starNo reviews
  • Rating 5 out of 5

    Etsy customerEtsy reviewWritten in French

    Fichier de qualité ! Parfait pour mes radiateurs

  • Rating 5 out of 5

    Etsy customerEtsy review

    all good. works well thanks

  • Rating 4 out of 5

    Etsy customerEtsy reviewWritten in German

    Immer wieder gerne sehr zufrieden guter druck

Reviews marked “Etsy review” were left on our Etsy shop. The term “Etsy” is a trademark of Etsy, Inc. This site uses the Etsy API but is not endorsed or certified by Etsy, Inc.