Skip to content

You decide what follows you

This site sets trackers, described in detail under “Choose”. They only load with your consent, and your refusal is kept for as long as your consent would be.

Privacy policy
Black SLIM radiator shelf bracket, 3D render of the printed part
Black SLIM radiator shelf bracket, 3D render of the printed part
The blade dropped behind the radiator, board held above it
The blade dropped behind the radiator, board held above it
The thirty files, by wall gap and board thickness
The thirty files, by wall gap and board thickness
Dimensions: 105 mm arm, 80 mm blade, board 60 mm above the radiator
Dimensions: 105 mm arm, 80 mm blade, board 60 mm above the radiator
The two measurements to take and the file grid
The two measurements to take and the file grid
Side view: only the blade goes into the gap
Side view: only the blade goes into the gap
Recommended print settings
Recommended print settings
Close-up of the slot holding the board
Close-up of the slot holding the board
Two printed white brackets in place on a radiator
Two printed white brackets in place on a radiator

Image 1 of 9

STL files, slim radiator shelf bracket

Thirty files, six thicknesses crossed with five gaps

€7.90

Files to download, available right away

In short

  • Instant download after payment, nothing is shipped
  • Thirty STL files: 6 board thicknesses by 5 wall gaps
  • A settings file and the selection table come with them

The problem

Your radiator sits almost against the wall, and the models you find need a wide gap behind them. None of them fit your home.

The solution

Thirty files cover every common combination: six board thicknesses crossed with five wall gaps. There is a file for your exact situation, not a compromise.

Description

The two measurements to take

The gap first: slide a ruler behind the radiator and measure the horizontal distance to the wall. Then the thickness of the board you will lay on top. Those two figures point to one file in the table provided.

What is in the pack

Thirty STL files. Six board thicknesses, 15, 18, 20, 22, 25 and 30 mm, crossed with five wall gaps, 20, 25, 30, 35 and 40 mm. A text file gives the print settings and the full selection table.

Air keeps moving

The gusset holds the board 60 mm above the radiator. Warm air rises between the two, and your board rests on nothing hot.

Delivery

The download link is available as soon as payment clears. Nothing is shipped.

Technical details

Format
STL
Number of files
30, plus a settings file
Thicknesses covered
15, 18, 20, 22, 25 and 30 mm
Wall gaps covered
20, 25, 30, 35 and 40 mm
Recommended materials
ASA, PETG or ABS
Delivery
Instant download

Safety warning

You print the part yourself: its strength depends on your printer, your filament and your settings. Test it empty before trusting it with anything. Light loads only, three kilos maximum. PLA softens on a hot radiator, use ASA, PETG or ABS instead.

Manufacturer and traceability

Manufacturer
Nyllao3D
Product identifier
NYL-STL-EQF
Country of manufacture
France

Customer reviews

No reviews yet.

Only customers who have received this piece can leave one. The first review will therefore come from a buyer, once the first orders have shipped.