Skip to content

You decide what follows you

This site sets trackers, described in detail under “Choose”. They only load with your consent, and your refusal is kept for as long as your consent would be.

Privacy policy
The foot of the slim bracket sliding behind the radiator, then the board laid on top
A white shelf resting on a vertical finned radiator
A white shelf resting on a vertical finned radiator
Two white brackets in place on top of a cream radiator
Two white brackets in place on top of a cream radiator
White shelf and its two brackets, three quarter view
White shelf and its two brackets, three quarter view
Profile of the slim bracket, showing its reduced thickness
Profile of the slim bracket, showing its reduced thickness
Diagram of the slim bracket's foot sliding into the space between radiator and wall
Diagram of the slim bracket's foot sliding into the space between radiator and wall
Side view of the slim bracket with its retaining hook
Side view of the slim bracket with its retaining hook

Image 1 of 7

Slim radiator shelf bracket, for tight walls

For a radiator 2 to 3 cm from the wall

Rating 5 out of 5See 1 review

€21.17

Pack: 2 brackets (for 1 board, not included)
Colour To choose
You are ordering: 1 x 2 brackets (for 1 board, not included)

A measurement, a board thickness: the piece is made to your size.

0 / 300 characters

Choose: Colour

In short

  • The foot of the bracket slides behind the radiator, into a 20 to 30 mm space
  • The board is held 60 mm above the radiator, warm air passes underneath
  • Board not included: you only receive the brackets

Which bracket fits your radiator?

gapradiatorwall

Slide a ruler behind the radiator and measure the space between its back and the wall.

The problem

Your radiator sits almost against the wall. The standard bracket needs at least 64 mm behind the radiator, so it will not fit.

The solution

The foot of this bracket is thin: it slides into a 20 to 30 mm space between the radiator and the wall. The top of the bracket holds your board 60 mm above the radiator. Warm air keeps rising, and the board never touches a hot surface.

Description

The measurement to take

Slide a ruler behind the radiator and measure the space between the back of the radiator and the wall. It must be between 20 and 30 mm. From 64 mm, take the standard bracket.

The board is not included

You only receive the brackets. Buy the board separately, for example cut to length at a DIY store. The bracket is made for a 20 mm thick board. If yours is 15, 18, 22, 25 or 30 mm, give its thickness in the order note, at no extra cost.

Air keeps moving

Laying a board flat on a radiator blocks the warm air and heats the wood. Here the board is held 60 mm above: warm air rises between the radiator and the shelf, and the board rests on nothing hot.

Why ASA

Same material as the standard model, the one used for car exterior parts. It holds past 100 degrees, where PLA softens and bends.

Sold in pairs

A shelf needs two brackets. One pack holds one pair: choose as many packs as shelves.

Made to order

Printed to order in my workshop. The dispatch time shown on this page accounts for the workshop queue.

Technical details

Material
ASA, holds past 100 degrees
Space behind the radiator
20 to 30 mm
Board height
60 mm above the radiator
Board
Not included. Made for 20 mm thick, 15 to 30 mm on request
Recommended load
3 kg per shelf, evenly spread
Made
Printed to order in France

Safety warning

Light loads only. Everyday items: books, a small plant, a speaker, a cup, keys, a phone. Three kilos maximum per shelf, spread across the board. Never place anything on it that would hurt someone or break if it fell. Do not use as a step or a handhold. Contains small parts, keep away from children under three.

Manufacturer and traceability

Manufacturer
Nyllao3D
Product identifier
NYL-EQF
Country of manufacture
France

Customer reviews

5Rating 5 out of 51 review

  • 5 stars1 review
  • 4 starsNo reviews
  • 3 starsNo reviews
  • 2 starsNo reviews
  • 1 starNo reviews
  • Rating 5 out of 5

    Etsy customerEtsy reviewWritten in French

    Travail très bien executé,je suis très satisfaite

Reviews marked “Etsy review” were left on our Etsy shop. The term “Etsy” is a trademark of Etsy, Inc. This site uses the Etsy API but is not endorsed or certified by Etsy, Inc.